How to use the massage chair

How to connect the massage chair to bluetooth

1. Connect the massage chair to the power supply and turn it on, and turn on the Bluetooth mobile phone switch;

2. Wait for the search to display the Bluetooth device of the massage chair in the search device under the Bluetooth menu;

3. The generally displayed icon is the headset icon, just click to pair;

4. After the pairing is complete, click the direction button on the right to set the connection to mobile phone audio and media audio.

How to Charge a Massage Chair

The place where the massage chair is charged is generally set at the bottom left or right corner of the massage chair, and some are also set at the back. Some public massage chairs have a charging function, and you need to scan the code to use it. Find the USB socket on the shared massage chair, and then find the cable that is suitable for your mobile phone on the shared massage chair. If you want to use it, you must scan the code to pay up.

How to use the massage chair

1. First turn on the power, do not operate immediately after turning on the power, all electrical appliances with program control should be buffered for two minutes after turning on the power, so that it is not easy to disrupt the program.

2. The operation of the massage chair is generally on the control panel. There is a red power control button on the control panel, press it to enter the operation steps.

3. For body massage, take off your shoes and sit on it, and put your legs in the position for leg massage.

4. The buttons on the control panel can adjust the supine height and comfort.

5. When entering the massage state, the adjustment should not be too hasty, especially the speed adjustment, which should be increased slowly.

How to disassemble the massage chair

Disassembly method of massage chair

Start by turning off the power, disconnecting the switch, unplugging the wires, and starting the disassembly. First disassemble and place all the detachable accessories of the massage chair (back leather cover, hand control, hand control bracket, seat cushion), and then the side panels and calf parts on both sides. Just observe carefully to find the connection and fixation The point is still very easy. Most of the side panels are fixed on the inner side with hexagonal screws or fixed screws. It can be removed.

How to move the massage chair

1. Ask a master to help disassemble and restore;

2. For small parts and components, it is best to put them in a storage bag uniformly to prevent omission and loss;

3. Each part after disassembly, such as: back pad, base, etc., must be carefully packed. First wrap it with stretch film, then wrap it repeatedly with bubble film, and finally pack it tightly with tape. Don’t forget to mark it with a marker Serial number and affix a fragile label to make it easy to find and prevent loss.

4. Even if the package is perfect, you must be careful and light-handed during the handling of the massage chair.